Yokomo Parts

Product Code: B2-009ARA This is a replacement Outer Hinge Pin Set for the Yokomo YZ-4 SF2/MO

Product Code: B2-009BFA This is a pack of two replacement Front Inner Suspension Arm Pins for the Yokomo YZ-2 CAL3/DTM3/3.1/SO/RO

Product Code: B2-010BCA This is a replacement Rear Hub Carrier Bearing Collar Set for the Yokomo B-MAX2

Product Code: B2-010FHA This is a pack of two replacement 12mm Hex Front Axles for the Yokomo SO1.0/RO

Product Code: B2-501GGA This is a replacement Gear Diff Gasket for the Yokomo RO/SO/MO

Product Code: B2-501GSA This is a pack of two replacement Gear Differential Outdrives for the Yokomo SO/RO

Product Code: B2-501MRA This is a replacement Ball Differential Outdrive Set for the Yokomo YD-2/YZ-2/SO

Product Code: B2-503GMA This is a replacement Steel Bevel Gear Diff Set for the RO/SO/MO

Product Code: B2-506A This is a pack of two replacement Yokomo Diff Drive Rings for the Yokomo Ball Differential

Product Code: B2-508TSA This is a replacement Ball Differential T-Nut & Spring Set for the Yokomo YD-2/YZ-2/SO

Product Code: B2-670CA This is a pack of two replacement Slipper Pads for the Yokomo SO/RO/MO

Product Code: B2-670PA This is a replacement Slipper Plate Set for the Yokomo SO/RO

Product Code: B2-S812ADA This is a pack of four replacement Yokomo Drain O-Ring/Screws for the Aluminum "X33" Shock Caps (B2-S812A)

Product Code: B4-011FA This is a pack of two Front Wheel Hexes (4.3) for the Yokomo SO/RO/MO

Product Code: B4-011RA This is a pack of two Rear Wheel Hexes (5.0) for the Yokomo RO/SO/MO

Product Code: B7-8DF16 This is a pack of four Yokomo Fluorine Rubber Diaphragms for the Yokomo SLF Short Shocks Made with fluororubber, they minimi...

Product Code: B7-S114A This is a pack of four Yokomo SLF Big Bore Short Shock II Shock Piston Φ1.1 x 4 Holes

Product Code: B7-S2BA This is a pack of four Yokomo SLF Big Bore Short Shock II Collar for P3 O-Ring (Thick)

Product Code: B7-S3S16A This is a pack of two Yokomo SLF Short Shock II Spring Cups (Black)

Product Code: B8-011NBA This is a pack of two Wheel Hubs (3.5mm) (Non-Clamping) for the Yokomo YD-2

Product Code: B8-206SHSA This is a pack of six Yokomo 11.5mm φ4.8 Rod End Ball Studs (Short Neck)

Product Code: B8-301AA This is an optional Aluminum Suspension Mount "A" (39.5-42.7mm) for the Yokomo YD-2

Product Code: B8-301BA This is an optional Aluminum Suspension Mount "B" (43.5-46.7mm) for the Yokomo BD/RD/SD

Product Code: B8-301BSA This is a replacement Plastic Suspension Mount Bushing Set for the Yokomo YD-2/RD/SD