YZ-4 SF2 Spare Parts

Product Code: Y2-501GG This is a replacement Gear Diff Gasket for the YZ-2 CAL3/DTM3/3.1/YZ-4 SF2

Product Code: S4-008R5B This is a replacement pair of Rear Suspension Arms L5/LD (Type B/Φ3.5 Pin) for the YZ-4 SF2/CAL3.1/DTM3.1

Product Code: Y2-503GPH This is an optional Hard Plastic Bevel Gear Set for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-4 SF/SF2

Product Code: LMRDELTA This is an optional LMR (Lee Martin Racing) Delta 4wd Bodyshell for the YZ-4 SF2. Designed and used by Yokomo champion drive...

Product Code: S4-S3X This is a replacement pack of eight “X30” Shock X-Rings

Product Code: Z2-206DM2 This is a replacement 5.5mm Rod End Parts Plastic Set for the YZ-2 CAL3/DTM3/3.1 and YZ-4 SF2

Product Code: S4-302R This is a replacement Rear Transmission Case for the Yokomo YZ-4 SF2

Product Code: YS-8BH This is an optional pack of four Hard Coated Aluminum Shock Cap Balls for the YZ-4 SF/ SF2/YZ-2 CAL3/DTM3/3.1

Product Code: LMRMAXQ This is an LMR (Lee Martin Racing) Max Q Rear Wing for the Yokomo YZ-2 ad YZ-4 series. 

Product Code: S4-008R5G This is an optional pair of Graphite Rear Suspension Arms L5/LD (Type B/Φ3.5 Pin) for the YZ-4 SF2/CAL3.1/DTM3.1

Product Code: YT-RW25 This is a pack of two optional Yokomo 25g Battery Weights

Product Code: BD-500GO This is a pack of four replacement Silicone Gear Differential O-Rings for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-4 SF/SF2

Product Code: Z2-S6M This is a replacement set of Shock End Plastic Parts for the YZ-2 CAL3/DTM3/3.1/YZ-4 SF/SF2

Product Code: ZC-S50S This is a pack of Yokomo 5.0mm Stainless Steel Spacer Shims (0.05/0.10/0.20mm). There are ten shims of each size in the pack.

Product Code: S4-CFM This is an optional Cooling Fan Mount for the YZ-4 SF/SF2

Product Code: BD-500GA This is a pack of two optional Aluminum Gear Diff Shafts for the YZ-4 SF/SF2/YZ-2 CAL3/ DTM3/3.1 These optional Aluminum Gea...

Product Code: S4-008F2 This is a replacement pair of Front Suspension Arms (Type B/2 Hole/Φ3.5 Pin) for the YZ-4 SF2

Product Code: S4-008F2G This is a pair of optional Graphite Front Suspension Arms (Type B/2 Hole/Φ3.5 Pin) for the Yokomo YZ-4 SF2

Product Code: BM-S152 This is a pack of two Yokomo 12mm "X" Flat Shock Piston (1.5mm x 2 Hole)

Product Code: S4-002FL This is a replacement Aluminum Front Bulkhead (Left) for the YZ-4 SF2

Product Code: Z2-S4L This is a replacement Yokomo Rear “X33” Shock Body

Product Code: Z2-412 This is a pack of four replacement Stabilizer Rod Ends for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-4 SF2/YZ-2T

Product Code: ZC-TB48B This is a pack to two optional Yokomo 48mm Titanium Turnbuckles

Product Code: ZC-206AH This is a pack of two replacement Aluminum Anti Roll Bar Stabilizer Balls (Hard) for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-4 SF2/...

Product Code: ZC-N4FLT This is a pack of four Yokomo M4 Aluminum Serrated Flanged Nuts. These 1/10 wheel nuts feature a larger than normal serrated...

Product Code: ZC-S40 This is a pack of Yokomo 4.0mm Stainless Steel Spacer Shims (0.13/0.25/0.50mm). There are twenty shims of each size in the pack.

Product Code: RP-103BK These optional Yokomo Racing Performer Ultra Front "Long" Buggy Springs (Black) (Soft) are 1mm longer than the conventional ...

Product Code: B4-821HY This is a pack of two 12mm Hex 1/10 Front Buggy Wheels (Yellow) for the Yokomo YZ-2 and YZ-4 series. 

Product Code: B4-827 This is a pack of two 12mm Hex 1/10 Rear Buggy Wheels (Yellow) for the Yokomo YZ-2 and YZ-4 series. 

Product Code: S4-200A This is an optional Aluminum Steering Bell Crank Set for the Yokomo YZ-4 SF2

Product Code: B2-S812A These are Optional Aluminum "X" Shock Caps w/Drain Screws (2) for the Yokomo YZ-2 and YZ-4 Series

Product Code: S4-SG80D This is a 48DP Dual Pad Spur Gear (Slipper) (80T)  *Not for direct spur configuration. Slipper only.

Product Code: RP-087-2 This is an optional Precision Machined Titanium Screw Set (137pcs) for the YZ4-SF2. The total set weighs only 1.7oz! If you ...

Product Code: ZC-C268 This is a pack of eight M2.6x8mm Socket Head Cap Screws

Product Code: ZC-BH26 This is a pack of ten M2x6mm Button Head Socket Screws