Yokomo

Product Code: Z2-S3X This is a replacement pack of eight “X33” Shock X-Rings for the YZ-2 CAL3 and DTM3

Product Code: Z2-206DM2 This is a replacement 5.5mm Rod End Parts Plastic Set for the YZ-2 CAL3, DTM3 and YZ-4 SF2

Product Code: S4-CFM This is a optional Cooling Fan Mount for the YZ-4 SF and SF2

Product Code: YS-8BH This is a optional pack of four Hard Coated Aluminum Shock Cap Balls for the YZ-4 SF, SF2, CAL3 and DTM3

Product Code: BM-S812R This is a replacement pack of two Plastic Shock Caps for "X33" Shocks for the CAL3 and DTM3. *May also fit other Yokomo mode...

Product Code: Z2-008GF2 This is a pair of Front Suspension Arms (Graphite) for the YZ-2 series *Depending on which YZ-2 you have, you may need part...

Product Code: ZC-BH26 This is a pack of ten M2x6mm Button Head Socket Screws

Product Code: S4-302R This is a replacement Rear Transmission Case for the YZ-4 SF2

Product Code: S4-302F This is a replacement Front Gear Box (Graphite) for the YZ-4 SF and SF2

Product Code: Z2-01068B This is a replacement Universal Bone (68.0mm) for the YZ-2 CAL3 and DTM3

Product Code: Z2-303I This is a replacement Idler Shaft for the YZ-2 CAL3 and DTM3

Product Code: S4-010TPC This is a replacement C-Clip Type Joint Pin Set for the YZ-2 CAL3, DTM3 and YZ-4 SF2

Product Code: Z2-505T This is a pack of fourteen replacement 3/32" Tungsten Carbide Ball Differential Balls. These are used in the Ball Diff Assemb...

Product Code: Z2-415RL This is a replacement Aluminum Rear Link Mount (For Offset Rear Hub Carrier) for the YZ-2 CAL3 and DTM3

Product Code: Z2-503I This is a replacement Idler Gear (LD Gear Box) for the YZ-2 CAL3 and DTM3 *Does not fit LC Gear Box. Idler Gear Z2-503IC is r...

Product Code: Z2-S413 This is a pack of eight “X33” Inner Shock Spacers for the YZ-2 series. 

Product Code: Z2-SG69SD This is a replacement Dual Pad/3 Hole Spur Gear (Slipper/Direct) (69T) for the YZ-2 series

Product Code: ZS-507 This is a replacement pack of Diff Thrust Washers and Balls for the YZ-2 series. These are used in the Ball Diff Assembly

Product Code: B2-506 This is a pack of two replacement Diff Drive Rings for the YZ-2 series. These are used in the Ball Diff Assembly

Product Code: Z2-018M2 This is a replacement Gearbox Case Support/Bulk Head Mount set for the YZ-2 CAL3 and DTM3

Product Code: Z2-S8T This is a pack of two optional Shock Mounting Nuts for the YZ-2 CAL3 and DTM3

Product Code: Z2-670HD This is an optional Direct Spur Gear Hub for the YZ-2 Series. Use with Z2-303TAD

Product Code: Z2-300FU This is an optional Aluminum Front Upper Suspension Mount for the YZ-2 CAL3 and DTM3

Product Code: S4-S2ST This is a pack to two optional Front “X30” Titanium Shock Shafts for the YZ-4 SF2

Product Code: Z2-S93 This is a replacement set of Shock Plastic Parts "X33" for the YZ-2 CAL3 and DTM3

Product Code: Z2-201CL3 This is an optional Aluminum Center Link for the YZ-2 CAL3 and DTM3

Product Code: YT-RWS10 This is an optional Shorty Size Battery Chassis Weight (34g)

Product Code: Z2-30RUMW This is an optional Aluminum Rear Upper Arm Mount (Wide) for the YZ-2 CAL3 and DTM3

Product Code: Z2-00RWT This is an Optional Chassis Balance Weight (25g) for the YZ-2 CAL3, DTM3 and YZ-2T

Product Code: Z2-002SPT This is a replacement Chassis Guard Side Plate Set for the YZ-2 CAL3, DTM3 and YZ-2T

Product Code: Z2-018-3 This is a replacement Graphite Rear Shock Tower for the YZ-2 CAL3 and DTM3

Product Code: Z2-S1722 This is a pack of two "X33"Shock Pistons (1.7x2 Hole 2.2mm)

Product Code: Z2-017-3 This is a replacement Graphite Front Shock Tower for the YZ-2 CAL3 and DTM3

Product Code: Z2-S1S2 This is a replacement Front “X3” Shock Set for the YZ-2 CAL3 and DTM3

Product Code: Z2-009F3 This is a pack of two replacement Front Outer Suspension Arm Pins for the YZ-2 CAL3 and DTM3

Product Code: Z2-008F3 This is a replacement pair of Front Suspension Arms (Type B) for the YZ-2 CAL3 and DTM3