Yokomo Parts

Product Code: B8-206SHSA This is a pack of six Yokomo 11.5mm φ4.8 Rod End Ball Studs (Short Neck)

Product Code: B8-301BA This is an optional Aluminum Suspension Mount "B" (43.5-46.7mm) for the Yokomo YD-2

Product Code: B8-301BSA This is a replacement Plastic Suspension Mount Bushing Set for the Yokomo YD-2/RD/SD

Product Code: BB-105-2A This is a pack to two Yokomo 5.0x10x4.0mm Ball Bearings

Product Code: BB-84-4A This is a pack of four Yokomo Φ4×Φ8×3mm Bearings

Product Code: D-180A This is a Yokomo Rwd Drift Spring Set Included springs: 2 x D-177FA 2 x D-177FS 2 x D-178RA 2 x D-178RS 2 x D-179RA 2 x D-179RS  

Product Code: IB-202KPA This is a pack of two Center Link Pins for the Yokomo RD/SD

Product Code: MO-002 This is a replacement Aluminum Main Chassis for the Yokomo MO2.0

Product Code: MO-010B50 This is a replacement Center Bone 50mm (for F/COL Slipper) for the Yokomo MO3.0

Product Code: MO-017-3 This is a replacement Graphite Front Shock Tower for the Yokomo MO3.0

Product Code: MO-203A This is a replacement Aluminum Servo Mount for the Yokomo MO2.0

Product Code: RD-202SR This is an optional Slide Rack Set for the Yokomo RD2.0 Converts the RD2.0 steering wheel to a slide rack type. The forward-...

Product Code: RP-101SHSA This is a pack of two Racing Performer φ4.8mm Titanium Rod End Ball (Short Neck) (11.5mm Length)

Product Code: S4-010TPCA This is a replacement C-Clip Type Joint Pin Set for the Yokomo YZ-2 CAL3/DTM3/3.1/SO/YZ-4 SF/SF2/MO

Product Code: S4-200AA This is an optional Aluminum Steering Bell Crank Set for the Yokomo YZ-4 SF2/MO1.0/MO2.0

Product Code: S4-412BA These are replacement Sway Bar Balls (Hard Anodized) for the Yokomo YZ-2/SO/MO

Product Code: S4-412WHA This is a "Hard" Anti Roll Bar Wire Set (1.6-2.0mm) for the Yokomo YZ-4 SF/SF2/MO

Product Code: S4-41306A This is an optional pair of Aluminum Front Steering Hub Carriers (6deg) for the YZ-4 SF2/MO

Product Code: S4-CFMU This is an optional Aluminum Cooling Fan Mount (Upper) for the Yokomo YZ-4 SF2/MO

Product Code: SD-202BS3 This is an Aluminum Bell Crank Base for the Yokomo SD3.0

Product Code: SD-TB39NA This is a pack to two replacement Yokomo 39mm Hard Steel Turnbuckles

Product Code: SO-017 This is a Graphite Front Shock Tower for the Yokomo SO3.0

Product Code: SO-412F11 This is a Front Anti Roll Bar (1.1mm) for the Yokomo SO