All

Product Code: B2-670CA This is a pack of two replacement Slipper Pads for the Yokomo YZ-2/YZ-4/YZ-870c/SO/MO

Product Code: Z2-01068BA This is a replacement Yokomo Universal Bone (68.0mm)

Product Code: ZS-507A This is a replacement pack of Diff Thrust Washers and Balls for the Yokomo YD-2/YZ-2 DTM3/3.1/SO. These are used in the Ball ...

Product Code: B2-506A This is a pack of two replacement Diff Drive Rings for the Yokomo Ball Differential

Product Code: Z2-200-3A This is a replacement Steering Bell Crank/Servo Horn/Servo Mount Set for the YZ-2 CAL3/DTM3/3.1/SO

Product Code: RPM-DX105RTA Tested not only in Japan but also on a wide variety of road surfaces and situations on drift circuits around the world, ...

Product Code: SP-02DV2R This is a Yokomo SP-02D V2 Programable Digital Low Profile RWD Drift Servo (Red). The latest drifting steering servo, whic...

Product Code: BL-RPX3 The "RPX3" is the new flagship model that surpasses the performance of the previous RPX speed controller, which had establish...

Product Code: Y2-204523A This is a Yokomo 23mm Aluminum Clamping Servo Horn (25T) The length and offset from the servo axis are optimized for YD-2 ...

Product Code: DRB-118LA This is an optional Short Size Li-Po Battery Holder for the Yokomo YD-4

Product Code: S4-SB1320 This is a pack of two 13mm Blank Shock Pistons (2.0mm Thick) for the Yokomo SO2.0/MO2.0

Product Code: RD-302FB This is an optional Aluminum Front Bulkhead Bridge for the Yokomo RD2.0/SD2.0 It increases the rigidity of the front area an...

Product Code: RPM-DX105RR Tested not only in Japan but also on a wide variety of road surfaces and situations on drift circuits around the world, T...

Product Code: SD-MS15B This is a Yokomo Mercury Sayaka Special S15 Body Set. Includes: Clear Lexan Body and Wing Aluminum Wing Stays Window Decals...

Product Code: YB-LSBB This is a Yokomo LiPo Safety Bag. Can be used for charging, discharging and storage of LiPo batteries. Fits up to 6 shorty si...

Product Code: B2-009ARA This is a replacement Outer Hinge Pin Set for the Yokomo YZ-4 SF2/MO

Product Code: MO-303BC This is a Center Diff Bearing Collar for the Yokomo MO2.0 Use with MO-302CM/BB-1812-2

Product Code: MO-101 This is a replacement Off Road Body (Standard) for the Yokomo MO2.0

Product Code: MO-010B67 This is an optional Center Bone 67mm (for F/Center Diff) for the Yokomo MO2.0

Product Code: S4-S4S13 This is a replacement 13mm Front “X30” Shock Body for the Yokomo SO2.0

Product Code: S4-S1L13 This is an optional 13mm Rear “X30” Shock Set for the Yokomo SO2.0/MO2.0