Yokomo YZ-2/YZ-4/SO/MO Series

Product Code: Z2-300RO These is a Front Upper/Lower Suspension Mount w/Wheel Hexes set for the Yokomo RO2.0

Product Code: MO-FSU This is an optional Fan Shroud for the Yokomo MO  The fan shroud is attached to the cooling fan to enhance the cooling effect ...

Product Code: RP-042-08A This is a pack of four Racing Performer M3x8mm Titanium Flat Head Socket Screws

Product Code: MO-010DC-3 This is a replacement Center Drive Joint for the Yokomo MO3.0

Product Code: YS-12975RF This is a pack of two Yokomo Off Road Φ13mm Flexible Rear Shock Springs (Orange) (9.75t) The Flexible Series is a lineup o...

Product Code: YS-12625FF This is a pack of two Yokomo Off Road Φ13mm Flexible Front Shock Springs (Green) (6.25t) The Flexible Series is a lineup o...

Product Code: YS-12600FF This is a pack of two Yokomo Off Road Φ13mm Flexible Front Shock Springs (Orange) (6.0t) The Flexible Series is a lineup o...

Product Code: RP-114-12 This is a pack of two Racing Performer φ5.5mm Titanium Rod End Ball Studs (12mm Thread) (2)

Product Code: RP-114-10 This is a pack of two Racing Performer φ5.5mm Titanium Rod End Ball Studs (10mm Thread) (2)

Product Code: ZC-A3605BA This is a pack of eight Yokomo 3x6x0.5mm Black Aluminum Shims

Product Code: ZC-C212A This is a pack of eight Yokomo M2x12mm Socket Head Cap Screws

Product Code: ZC-S350A This is a pack of ten Yokomo 3.1 x 5.0 x 0.50mm Stainless Steel Shims

Product Code: Z4-41310A This is a pair of Aluminum Front Steering Hub Carriers (10deg) for the MO

Product Code: Z2-S1722A This is a pack of two Yokomo "X33"Shock Pistons (1.7x2 Hole 2.2mm)

Product Code: Z2-S162A This is a pack of two Yokomo "X33"Shock Pistons (1.6x2 Hole 2.0mm)

Product Code: MO-415P1 This is a pack of two replacement Graphite Steering Block Plates (DOT1) for the Yokomo MO2.0

Product Code: MO-303OP This is a replacement Slipper Outer Plate for the Yokomo YZ-870c/MO2.0

Product Code: S4-303P2A This is a replacement Slipper Plate for the Yokomo MO

Product Code: S4-200P2A This is a replacement Graphite Bell Crank Arm Plate for the Yokomo MO1.0/MO2.0

Product Code: S4-010B65A This is a replacement Center 65mm Bone for the Yokomo MO1.0

Product Code: Z4-200 This is a Steering Bellcrank & Servo Mount Set w/17mm Servo Horns for the Yokomo original YZ-4. *Not for YZ-4SF2/MO 

Product Code: S4-S4L13 This is a replacement 13mm Long Rear “X30” Shock Body for the Yokomo SO2.0/SO3.0/MO2.0

Product Code: BB-135-2A This is a pack to two replacement Yokomo 5x13x4.0mm Ball Bearings

Z2-415RDCG This is a Graphite Molded Rear Hub Carrier/Bushing Set for the Yokomo SO. This SO series rear hub carrier set retains the standard plast...