Yokomo Parts

Product Code: Z2-302CTA This is a Gear Box Cap, Diff Height Adapters & Spacer Set for the Yokomo YZ-2/SO

Product Code: Z2-302TA This is a Gear Box (LD) for the Yokomo YZ-2/SO

Product Code: Z2-302TLCA This is a replacement Gear Box (LC) for the Yokomo YZ-2/SO

Product Code: Z2-302TLCG This is a Gear Box (LC) (Graphite) for the Yokomo YZ-2/SO Made from Graphite-laced resin, which is harder than the standar...

Product Code: Z2-303IA This is an Idler Shaft for the Yokomo YZ-2/SO

Product Code: Z2-303TA3A This is a replacement Aluminum Top Shaft for the Yokomo YZ-2 CAL3/DTM3/3.1/SO

Product Code: Z2-303TADA This is an Aluminum Direct Mount Top Shaft for the Yokomo YZ-2/SO Use with Yokomo Z2-670HDA Direct Spur Gear Hub

Product Code: Z2-304THD This is an Aluminum HD Motor Mount for the Yokomo YZ-2/SO

Product Code: Z2-30RUMWA This is an optional Aluminum Rear Upper Arm Mount (Wide) for the YZ-2 CAL3/DTM3/3.1/SO

Product Code: Z2-412A This is a pack of four Stabilizer Rod Ends for the Yokomo YZ-2/SO/MO

Product Code: Z2-412F3A This is a Front Anti Roll Bar Set (6 Sizes) (0.7mm to 1.2mm) for the Yokomo YZ-2/SO

Product Code: Z2-412R3A This is a Rear Anti Roll Bar Set (6 Sizes) (1.0mm to 1.5mm) for the Yokomo YZ-2/SO/RO

Product Code: Z2-413G3A This is a Front Hub Carrier/Bushing Set (Graphite) for the Yokomo YZ-2 CAL3.1/DTM3.1/SO Molded out of graphite to improve c...

Product Code: Z2-413H3A This is a replacement Front Hub Carrier/Bushing Set (Hard) for the Yokomo SO/RO

Product Code: Z2-414A This is an Aluminum King Pin Set for the Yokomo YZ-2/SO/RO

Product Code: Z2-415RDCA This is a Rear Hub Carrier and Bushing Set for the Yokomo YZ-2/SO

Product Code: Z2-415RS2A This is a set of Aluminum Rear Hub Carriers for the YZ-2/SO

Product Code: Z2-415S10A This is a pack of ten 3.1 x 6.0 x 1.0mm Yokomo Hub Carrier Spacers.

Product Code: Z2-415S21 This is a pack of two Graphite S2 Steering Block Plates (DOT1) for the Yokomo SO2.0/SO3.0

Product Code: Z2-415S2G This is a Graphite Steering Block Set for the Yokomo SO2.0/SO3.0

Product Code: Z2-415S2H This is a Steering Block Set (Hard) for the Yokomo SO2.0/SO3.0

Product Code: Z2-415SP These are Steering Block Plates for the Yokomo RO1.0/RO2.0

Product Code: Z2-415T05A This is a pack of two Graphite Steering Block Plates (0.5mm Offset) for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-2T/SO1.0

Product Code: Z2-415T10A This is a pack of two Graphite Steering Block Plates (1mm offset) for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-2T/SO1.0