Yokomo YZ-2/YZ-4/SO/MO Series

Product Code: S4-008R5GA This is a pair of Graphite Rear Suspension Arms L5/LD (Type B/Φ3.5 Pin) for the Yokomo SO/MO

Product Code: Z2-008F3GA This is a pair of Graphite Front Suspension Arms (Type B) for the Yokomo SO

Product Code: YS-8BH13 This is a pack of four optional 13mm Aluminum Shock Cap Balls for the Yokomo SO2.0/SO3.0/MO2.0/MO3.0

Product Code: Z2-20425A This is a Yokomo 15.5mm Aluminum Clamping Servo Horn (25T)

Product Code: Z2-413G3A This is a Front Hub Carrier/Bushing Set (Graphite) for the Yokomo SO Molded out of graphite to improve crash resistance and...

Product Code: Z2-002BTA This is a replacement Front Bulkhead for the Yokomo SO/RO

Yokomo Hard Coated Aluminum Pinion Gears (48DP) (16T-40T)

Product Code: Z2-413H3A This is a replacement Front Hub Carrier/Bushing Set (Hard) for the Yokomo SO/RO

Product Code: Z2-008F3A This is a replacement pair of Front Suspension Arms (Type B) for the Yokomo SO/RO

Product Code: Z2-SG72SDA This is a Dual Pad/3 Hole Spur Gear (Slipper/Direct) (72T) for the Yokomo SO

Product Code: ZC-WGB3 This is a Yokomo 12 Gauge Aluminum Wire Guide w/3 Holes (Black) The guide helps neatly organize motor cables, especially when...

Product Code: Z2-670HDA This is a Direct Spur Gear Hub for the Yokomo SO Use with Z2-303TADA Yokomo Aluminum Direct Mount Top Shaft

Product Code: S4-S3XA This is a replacement pack of eight “X30” Shock X-Rings

Product Code: S4-008R5BA This is a replacement pair of Rear Suspension Arms L5/LD (Type B/Φ3.5 Pin) for the Yokomo SO/MO/RO

Product Code: Z2-303TADA This is an Aluminum Direct Mount Top Shaft for the Yokomo SO Use with Yokomo Z2-670HDA Direct Spur Gear Hub

Product Code: Z2-415S2G This is a Graphite Steering Block Set for the Yokomo SO2.0/SO3.0

Product Code: Z2-300FLSA This is a Steel Front Lower Suspension Mount for the Yokomo SO/RO  

Product Code: S4-S813R This is a pack of two replacement 13mm Shock Caps for the Yokomo SO2.0/SO3.0/MO2.0

Product Code: Z2-002BG This is an optional Front Bulkhead (Graphite) for the Yokomo YZ-2 CAL3/DTM3/3.1/SO/RO Manufactured with high grade graphite ...

Product Code: Z2-201BA3A This is an optional pair of Aluminum Bell Cranks (L/R) for the Yokomo YZ-2 CAL3/DTM3/3.1/SO

Product Code: B2-009BFA This is a pack of two replacement Front Inner Suspension Arm Pins for the Yokomo SO

Product Code: Z2-300FBA This is an optional Aluminum Front Brace for the Yokomo RO/SO

Product Code: B2-501GGA This is a replacement Gear Diff Gasket for the Yokomo RO/SO/MO

Product Code: Z2-30RUMWA This is an optional Aluminum Rear Upper Arm Mount (Wide) for the Yokomo SO