Yokomo YZ-4/MO Series

Product Code: S4-203P2A This is a replacement Graphite Servo Mount Plate for the Yokomo MO1.0

Product Code: S4-206C1A This is a pack of four replacement Rod End Ball Collars for the Yokomo MO

Product Code: S4-300FFA This is a replacement Aluminum Front Suspension Mount (FF) for Yokomo MO

Product Code: S4-300FRA This is a replacement Aluminum Front Suspension Mount (FR) for Yokomo the MO

Product Code: S4-300RF1A This is a replacement Aluminum Rear Suspension Mount (RF) for the Yokomo MO

Product Code: S4-300RRA This is a replacement Aluminum Rear Suspension Mount (Rear) for the Yokomo MO

Product Code: S4-300RSA This is a replacement 1.00mm Aluminum Rear Suspension Mount Spacer for the Yokomo MO

Product Code: S4-302FA This is a replacement Front Gear Box (Graphite) for the Yokomo MO

Product Code: S4-302H2A This is a replacement set of Yokomo Gear Box Height Adapters for the Yokomo MO

Product Code: S4-302RA This is a replacement Rear Transmission Case for the Yokomo MO

Product Code: S4-303DCBA This is a replacement Slipper Drive Cup for the Yokomo YZ-4 SF2/MO

Product Code: S4-303MS2A This is a replacement Slipper Main Shaft for the Yokomo MO1.0

Product Code: S4-303P2A This is a replacement Slipper Plate for the Yokomo MO

Product Code: S4-303PA This is a replacement Slipper Plate (Hard Anodized) for the Yokomo YZ-4 SF *Not for the YZ-4 SF2/MO

Product Code: S4-304CM2A This is a replacement Aluminum Center Mount for the MO1.0

Product Code: S4-304CP2A This is a replacement Graphite Center Mount Plate for the Yokomo MO1.0

Product Code: S4-412BA These are replacement Sway Bar Balls (Hard Anodized) for the Yokomo MO

Product Code: S4-412HA This is a replacement Anti Roll Bar Stabilizer Holder Set for the Yokomo MO

Product Code: S4-412WHA This is a "Hard" Anti Roll Bar Wire Set (1.6-2.0mm) for the Yokomo MO

Product Code: S4-412WSA This is a "Soft" Anti Roll Bar Wire Set (1.0-1.5mm) for the Yokomo MO

Product Code: S4-413-8A This is a replacement pair of Front Steering Hub Carriers (8deg) for the Yokomo MO

Product Code: S4-41306A This is an optional pair of Aluminum Front Steering Hub Carriers (6deg) for the YZ-4 SF2/MO

Product Code: S4-415RA This is a replacement Rear Hub Carrier/Bushing set (Φ3mm Pin) for the Yokomo MO

S4-415RG  This is a Graphite Molded Rear Hub Carrier/Bushing Set for the Yokomo MO This MO series rear hub carrier set retains the standard plastic...