Yokomo YZ-2/YZ-4/SO/MO Series

Product Code: MO-303MS This is a replacement Main Drive Shaft for the Yokomo MO2.0

Product Code: MO-302CM This is a replacement Aluminum Center Mount for the Yokomo MO2.0

Product Code: MO-203P This is a replacement Graphite Servo Mount Plate for the Yokomo MO2.0

Product Code: S4-206C1A This is a pack of four replacement Rod End Ball Collars for the Yokomo YZ-4 SF2/MO

Product Code: S4-203P2A This is a replacement Graphite Servo Mount Plate for the Yokomo YZ-4 SF2/MO1.0

Product Code: S4-201CL2A This is a replacement Graphite Center Link for the Yokomo YZ-4 SF2/MO

Product Code: S4-018SA This is a pack of four replacement Shock Tower Spacers for the Yokomo YZ-4 SF2/MO

Product Code: S4-010FAA This is a replacement Front Axle for the Yokomo YZ-4 SF2/MO This axle needs to be used with ZC-N4FLT nut 

Product Code: S4-010C93A This is a replacement 93mm Center Differential Drive Shaft for the Yokomo YZ-4 SF *Not for YZ-4 SF2 and MO series.

Product Code: S4-002SP2A This is a replacement Side Plate/Battery Post/Antenna Mount set for the Yokomo YZ-4 SF2/MO

Product Code: ZC-204323A This is a Yokomo 23mm Aluminum Clamping Servo Horn (23T)

Product Code: S4-002BCA This is a replacement Aluminum Bulkhead Cap for the Yokomo YZ-4 SF2/MO1.0

Product Code: BM-S172A This is a pack of two Yokomo "X" Shock Piston (2 Hole/1.7mm)

Product Code: BM-S143A This is a pack of two Yokomo "X" Flat Shock Pistons (3x1.4mm)

Product Code: B2-501MRA This is a replacement Ball Differential Outdrive Set for the Yokomo YD-2/YZ-2/SO

Product Code: RO-TBS10 This is a Titanium Turnbuckle Set for the Yokomo RO

Product Code: RO-304D This is an Aluminum Motor Plate for the Yokomo RO2.0

Product Code: RO-303TS These is a Steel Top Shaft w/Idler Gear for the Yokomo RO2.0

Product Code: Z2-415SP These are Steering Block Plates for the Yokomo RO1.0/RO2.0

Product Code: RO-002 This is a Main Chassis for the Yokomo RO1.0/RO2.0

Product Code: RO-302D This is a Transmission Case for the Yokomo RO2.0

Product Code: RO-304GC This is a Gear Cover/Wing Mount for the Yokomo RO2.0

Product Code: RO-018RD This is a Rear Shock Tower/ Rear Upper Mount for the Yokomo RO2.0

Product Code: RO-018RDG This is a Graphite Molded Rear Shock Tower/ Rear Upper Mount for the Yokomo RO2.0 Using high-strength, graphite-infused res...