yokomo

Product Code: MO-203A-3 This is a replacement Aluminum Servo Mount for the Yokomo MO3.0

Product Code: MO-203P This is a replacement Graphite Servo Mount Plate for the Yokomo MO2.0

Product Code: MO-203P-3 This is a replacement Graphite Servo Mount Plate for the Yokomo MO3.0

Product Code: MO-300RF-3 This is a replacement Aluminum Rear Suspension Mount (Front) for the Yokomo MO3.0

Product Code: MO-300RR-3 This is a replacement Aluminum Rear Suspension Mount (Rear) for the Yokomo MO3.0

Product Code: MO-302CM This is a replacement Aluminum Center Mount for the Yokomo MO2.0

Product Code: MO-303AJ This is a replacement Slipper Nut / Spring for the Yokomo MO2.0

Product Code: MO-303AJS This is a replacement COL Adjust Screw Set for the Yokomo MO2.0

Product Code: MO-303BC This is a Center Diff Bearing Collar for the Yokomo MO2.0 Use with MO-302CM/BB-1812-2

Product Code: MO-303DCB This is a replacement COL Drive Cup w/One-Way Bearing for the Yokomo MO2.0

Product Code: MO-303DP This is a replacement Front Drive Plate for the Yokomo MO2.0

Product Code: MO-303MS This is a replacement Main Drive Shaft for the Yokomo MO2.0

Product Code: MO-303OP This is a replacement Slipper Outer Plate for the Yokomo YZ-870c/MO2.0

Product Code: MO-304CP This is a replacement Graphite Center Mount Plate for the Yokomo MO2.0

Product Code: MO-415P1 This is a pack of two replacement Graphite Steering Block Plates (DOT1) for the Yokomo MO2.0

Product Code: MO-415RA This is an optional pair of Aluminum Rear Hub Carriers L/R for the Yokomo MO Series  The rigidity of the axle area is greatl...

Product Code: MO-FSL This is an optional Fan Shroud for the Yokomo MO  The fan shroud is attached to the cooling fan to enhance the cooling effect ...

Product Code: MO-FSU This is an optional Fan Shroud for the Yokomo MO  The fan shroud is attached to the cooling fan to enhance the cooling effect ...

Product Code: MO-TBS20 This is a Titanium Turnbuckle Set for the Yokomo MO2.0/MO3.0  

Product Code: RP-089G These optional Yokomo Racing Performer Ultra Rear Buggy Springs (Green/Dirt) are designed for 1/10 off-road dirt tracks and h...

Product Code: RD-002 This is a replacement Main Chassis for the Yokomo RD2.0

Product Code: RD-002G This is an optional Graphite Main Chassis (2.4mm Thick) for the Yokomo RD2.0 The plates are cut out of matte graphite for a c...

Product Code: RD-003G This is an optional Graphite Upper Deck (2.2mm Thick) for the Yokomo RD2.0 The upper deck is designed to balance rigidity wit...

Product Code: RD-008FA17 This is a pack of two optional Aluminum Φ4.5mm Rod End Adapters (17mm) for the Yokomo RD2.0 Made of lightweight aluminum t...