Yokomo Parts

Product Code: D-181R This is a Yokomo Competition Progressive Spring φ1.3x28mm for Drift

Product Code: D-182F This is a Yokomo Competition Progressive Spring φ1.4x26.5mm for Drift

Product Code: D-183F This is a Yokomo Competition Progressive Spring φ1.5x26.5mm for Drift

Product Code: D-184F This is a Yokomo Competition Progressive Spring φ1.5x26.5mm for Drift

Product Code: D-185 This is a Yokomo Drift Competition Spring Set Included springs: (Red, Green, White, and Blue) (4 pairs)  

Product Code: D-186 This is a Yokomo LTS Spring φ0.9x45mmx8.5 for Drift (Front) It's a multi-winding spring for pulling out the roll and performing...

Product Code: D-187 This is a Yokomo LTS Spring φ1.0x48mmx9.0 for Drift (Rear) It's a multi-winding spring for pulling out the roll and performing ...

Product Code: D-188 This is a Yokomo LTS Spring φ1.0x48mmx10.0 for Drift (Rear) It's a multi-winding spring for pulling out the roll and performing...

Product Code: DRB-118LA This is an optional Short Size Li-Po Battery Holder for the Yokomo DRB

Product Code: DRB-206A This is a replacement Ball Cup Set for the Yokomo DRB

Product Code: IB-202KPA This is a pack of two Center Link Pins for the Yokomo RD/SD

Product Code: MD-144LW This is an optional Wide Drive Belt for MD3.0 (48T/5.0mm Width) for the Yokomo MD3.0 The wide-type drive belt further enhanc...

Product Code: MD-202S This is an Aluminum Spacer Φ3×Φ5×2.0mm for the Yokomo MD2.0

Product Code: MD-202SC This is a replacement Slide Rack Stopper Cam for the Yokomo MD2.0

Product Code: MD-302TH This is an Aluminum Top Shaft Holder for the Yokomo RD/SD/MD

Product Code: MD-303P This is an Aluminum Idler Post for the Yokomo MD3.0 The gear mounting section is Φ5mm with a length of 10mm

Product Code: MD-500GS-3 This is a Plastic Gear Differential Set (36T) for the Yokomo MD3.0

Product Code: MD-631-35 This is an optional Aluminum Top Shaft (15T Pulley) for the Yokomo MD3.0 Featuring 15 teeth (one more than standard) this e...

Product Code: MD-DHA32 These are Aluminum Diff Height Adjust 3 Gears +2mm L/R for the Yokomo RD/SD/MD

Product Code: MO-002 This is a replacement Aluminum Main Chassis for the Yokomo MO2.0

Product Code: MO-002-3 This is a replacement Aluminum Main Chassis for the Yokomo MO3.0

Product Code: MO-002BC This is a replacement Aluminum Bulkhead Cap for the Yokomo MO2.0

Product Code: MO-002FL This is a replacement Aluminum Front Bulkhead (L) for the Yokomo MO2.0

Product Code: MO-002FLL-3 This is a replacement Aluminum Front Lower Bulkhead (Left) for the Yokomo MO3.0