Yokomo YD-2/RD/SD/MD Series

Product Code: Y4-630A This is an Aluminum Spur Gear Hub (Black) for the Yokomo RD/SD/MD Series

Product Code: Y2-S4CPA This is a replacement Yokomo SLF Shock O-Ring Cap/Adjust Nut/Cap Nut (Purple)

Product Code: Y2-S4CRA This is a replacement Yokomo SLF Shock O-Ring Cap/Adjust Nut/Cap Nut (Red)

Product Code: Y2-SBBSA This is a SLF (Super Low Friction) Aluminum Big Bore Shock Set (Black) for the Yokomo RD/SD/MD The cylinder diameter is wide...

Product Code: Y2-SBBSRA This is an SLF (Super Low Friction) Aluminum Big Bore Shock Set (Red) for the Yokomo RD/SD/MD The cylinder diameter is wide...

Product Code: Y2-SBBSPA This is an SLF (Super Low Friction) Aluminum Big Bore Shock Set (Purple) for the Yokomo RD/SD/MD The cylinder diameter is w...

Product Code: Y2-SBBSBL This is an SLF (Super Low Friction) Aluminum Big Bore Shock Set (Purple) for the Yokomo RD/SD/MD The cylinder diameter is w...

Product Code: Y4-S6A This is an optional Shock Cap/Shock End Big Bore Shock Set for the Yokomo YD-4

Product Code: RD-008RS This is an optional Aluminum Rear Shock Lower Adapter for the Yokomo RD2.0 This aluminum mounting adapter holds the lower re...

Product Code: YS-7HGCA This is a pack of eight Yokomo High Grade Cream P3 O-Rings

Product Code: ZS-016PA These are replacement Body Mount Posts for the Yokomo drift package

Product Code: RD-002G This is an optional Graphite Main Chassis (2.4mm Thick) for the Yokomo RD2.0 The plates are cut out of matte graphite for a c...

Product Code: RD-003G This is an optional Graphite Upper Deck (2.2mm Thick) for the Yokomo RD2.0 The upper deck is designed to balance rigidity wit...

Product Code: SD-303S3 This is an Aluminum Upper Deck Post for the Yokomo SD3.0

Product Code: Y2-002RP This is an optional Teams Plastic Rear Chassis Plate for the Yokomo SD2.0 Made from resin for the rear chassis of the SD2.0,...

Product Code: Y4-201PBA This is a Brass Bell Crank Post for the Yokomo YD-2/YD-4

Product Code: SD-202BS3 This is an Aluminum Bell Crank Base for the Yokomo SD3.0

Product Code: RD-010FDS This is an optional Double Bearing Front Axle Set for Drift for the Yokomo RD/SD/MD series. The double bearing holding the ...

Product Code: Y2-301SA This is a pack of two Suspension Mount Spacers (1.0mm) for the Yokomo RD/SD/MD3.0

Product Code: Y2-301E2A This is an optional Aluminum Suspension Mount "E" (60.8-64.0mm) for the Yokomo YD-2EX

Product Code: Y2-001GBA This is an optional Graphite Bumper/Brace for the Yokomo YD-2

Product Code: Y2-001BA This is an optional Aluminum Front Bumper Brace (Black) for the Yokomo YD-2/YD-4

Product Code: Y4-203AA This is an optional Aluminum Servo Mount for the Yokomo YD-2/YD-4

Product Code: ZC-F310TA This is a pack of five Yokomo M3x10mm Titanium Flat Head Socket Screws