Yokomo YZ-2/YZ-4/SO/MO Series

Product Code: Z2-413G3A This is a Front Hub Carrier/Bushing Set (Graphite) for the Yokomo SO Molded out of graphite to improve crash resistance and...

Yokomo Hard Coated Aluminum Pinion Gears (48DP) (16T-40T)

Product Code: Z2-303TADA This is an Aluminum Direct Mount Top Shaft for the Yokomo SO Use with Yokomo Z2-670HDA Direct Spur Gear Hub

Product Code: YMR003 Introducing the Yok Modz Racing Custom Rear (RR) Mount - the perfect upgrade for your Yokomo YZ-2/SO series car! Take your RC ...

Product Code: S4-S813A This is a pack of two Aluminum Shock Caps (13mm Shocks) for the Yokomo SO2.0/SO3.0/MO2.0/MO3.0

Product Code: Z2-300FLAA Aluminum Front Lower Suspension Mount for the Yokomo SO

Product Code: B2-503GMA This is a replacement Steel Bevel Gear Diff Set for the RO/SO/MO

Product Code: B8-301BSA This is a replacement Plastic Suspension Mount Bushing Set for the Yokomo RD/SD

Product Code: ZC-OFFD This is a replacement Yokomo Decal Sheet for Off-Road Body Shell.

Product Code: SO-203 This is an Aluminum Servo Mount for the Yokomo SO3.0

Product Code: YMR005 Push the limits of your setup with the Yok Modz Racing Rear Camber Link Shock Tower, designed specifically for the Yokomo SO s...

Product Code: ZC-N4FBKA This is a pack of four Yokomo M4 Aluminum Serrated Flanged Nuts (Black). 

Product Code: Z2-415SH3A This is a pair of Steering Blocks (Hard Type) for the Yokomo SO1.0/RO

Product Code: S4-412WHA This is a "Hard" Anti Roll Bar Wire Set (1.6-2.0mm) for the Yokomo MO

Product Code: S4-S1M13 This is a replacement 13mm (Rear/Short) “X30” Shock Set for the Yokomo SO2.0/SO3.0/MO2.0

Product Code: Z2-415S21 This is a pack of two Graphite S2 Steering Block Plates (DOT1) for the Yokomo SO2.0/SO3.0

Product Code: Z2-002RWTA This is an Optional Chassis Balance Weight (25g) for the Yokomo SO1.0

Product Code: ZC-F310A This is a pack of ten Yokomo M3x6mm Flat Head Hex Screws

This is a replacement 48DP Spur Gear of Center Diff for the Yokomo MO  Available in 80T and 84T

Product Code: S4-S4CA This is a replacement "X30" Shock Collar Set for the Yokomo SO/MO

Product Code: Z2-S7TA This is a pack of four Aluminum Shock End Balls (Hard) for the Yokomo SO/MO

Product Code: SO-018 This is a Graphite Rear Shock Tower for the Yokomo SO3.0

Product Code: Z2-20423A This is a Yokomo 15.5mm Aluminum Clamping Servo Horn (23T)

Product Code: ZC-N4AFLBK This is a pack of four Yokomo M4 Flanged Aluminum Low Profile Nylon Lock Nuts (Black) Designed to deliver dependable perfo...