Yokomo YZ-2/YZ-4/SO/MO Series

Product Code: MO-018-3 This is a replacement Graphite Rear Shock Tower for the Yokomo MO3.0

Product Code: MO-010DC-3 This is a replacement Center Drive Joint for the Yokomo MO3.0

Product Code: MO-002-3 This is a replacement Aluminum Main Chassis for the Yokomo MO3.0

Product Code: ZC-N3L3 This is a pack of ten Yokomo M3×3.0mm Steel Lock Nuts

Product Code: YS-12975RF This is a pack of two Yokomo Off Road Φ13mm Flexible Rear Shock Springs (Orange) (9.75t) The Flexible Series is a lineup o...

Product Code: YS-12625FF This is a pack of two Yokomo Off Road Φ13mm Flexible Front Shock Springs (Green) (6.25t) The Flexible Series is a lineup o...

Product Code: YS-12105RF This is a pack of two Yokomo Off Road Φ13mm Flexible Rear Shock Springs (Red) (10.5t) The Flexible Series is a lineup of o...

Product Code: RP-114-12 This is a pack of two Racing Performer φ5.5mm Titanium Rod End Ball Studs (12mm Thread) (2)

Product Code: ZC-F312A This is a pack of ten Yokomo M3x12mm Flat Head Screws

Product Code: ZC-206-A This is a pack of five Yokomo Rod End Ball Stud (Length 13mm/6mm Thread) (5)

Product Code: ZC-A3605BA This is a pack of eight Yokomo 3x6x0.5mm Black Aluminum Shims

Product Code: ZC-C212A This is a pack of eight Yokomo M2x12mm Socket Head Cap Screws

Product Code: ZC-206LHA This is a pack of six Yokomo 14.7mm Socket Head Ball Studs (Thread 8mm) (Size L)

Product Code: ZC-S350A This is a pack of ten Yokomo 3.1 x 5.0 x 0.50mm Stainless Steel Shims

Product Code: Z4-41310A This is a pair of Aluminum Front Steering Hub Carriers (10deg) for the YZ-4 SF2/MO

Product Code: Z2-S4CA This is a replacement pack of "X33" Shock Collars for the Yokomo YZ-2 CAL3/DTM3

Product Code: Z2-S162A This is a pack of two Yokomo "X33"Shock Pistons (1.6x2 Hole 2.0mm)

Product Code: Z2-S172A This is a pack of two Yokomo 2.0mm Shock Pistons (1.7mm x 2 Hole)

Product Code: MO-303AJS This is a replacement COL Adjust Screw Set for the Yokomo MO2.0

Product Code: MO-415P1 This is a pack of two replacement Graphite Steering Block Plates (DOT1) for the Yokomo MO2.0

Product Code: MO-303DP This is a replacement Front Drive Plate for the Yokomo MO2.0

Product Code: MO-303DCB This is a replacement COL Drive Cup w/One-Way Bearing for the Yokomo MO2.0

Product Code: S4-200P2A This is a replacement Graphite Bell Crank Arm Plate for the Yokomo MO1.0/MO2.0

Product Code: Z4-200 This is a Steering Bellcrank & Servo Mount Set w/17mm Servo Horns for the Yokomo original YZ-4. *Not for YZ-4SF2/MO