YZ-2 CAL3 Spare Parts

Product Code: Z2-413G3 This is an Optional Front Hub Carrier/Bushing Set (Graphite) for the YZ-2 CAL3.1/DTM3.1 Molded out of graphite to improve cr...

Product Code: Z2-008F3 This is a replacement pair of Front Suspension Arms (Type B) for the YZ-2 CAL3/DTM3/3.1

Product Code: Z2-413H3 This is a replacement Front Hub Carrier/Bushing Set (Hard) for the Yokomo YZ-2 CAL3.1/DTM3.1

Product Code: LMRAPOLLO This is an optional LMR (Lee Martin Racing) Apollo 2wd Bodyshell for the YZ-2 CAL3/3.1 Designed and used by Yokomo champion...

Product Code: Z2-S3X This is a replacement pack of eight “X33” Shock X-Rings

Product Code: S4-008R5B This is a replacement pair of Rear Suspension Arms L5/LD (Type B/Φ3.5 Pin) for the YZ-4 SF2/CAL3.1/DTM3.1

Product Code: Y2-501GG This is a replacement Gear Diff Gasket for the YZ-2 CAL3/DTM3/3.1/YZ-4 SF2

Product Code: Y2-503GPH This is an optional Hard Plastic Bevel Gear Set for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-4 SF/SF2

Product Code: Z2-002S31 This is a replacement of Side Plates (w/BH Mounts) for the Yokomo YZ-2 CAL3.1/DTM3.1

Product Code: Z2-002BT This is a replacement Front Bulk Head for the YZ-2 CAL3/DTM3/3.1

Product Code: Z2-300R31 This is a replacement Rear Upper Arm Mount/Sway Bar Holder/Gear Box Support for the YZ-2 CAL3.1/DTM3.1

This is and LMR (Lee Martin Racing) Chassis Protective Sheet with screw holes for the YZ-2 CAL3.  Protect and give your chassis some bling with an ...

Product Code: Z2-206DM2 This is a replacement 5.5mm Rod End Parts Plastic Set for the YZ-2 CAL3/DTM3/3.1 and YZ-4 SF2

Product Code: YS-8BH This is an optional pack of four Hard Coated Aluminum Shock Cap Balls for the YZ-4 SF/ SF2/YZ-2 CAL3/DTM3/3.1

Product Code: Z2-001B3 This is a replacement Front/Rear Bumper Set for the Yokomo YZ-2 CAL3/DTM3/3.1

Product Code: Z2-002MTC This is an optional Graphite Electronics Tray for the YZ-2 CAL3/DTM3/3.1/YZ-2T

Product Code: Z2-415S10 This is a pack of ten replacement 3.1 x 6.0 x 1.0mm Hub Carrier Spacers.

Product Code: BM-S812R This is a replacement pack of two Plastic Shock Caps for the YZ-2 CAL3/DTM3/3.1/YZ-4 SF/SF2

Product Code: LMRMAXQ This is an LMR (Lee Martin Racing) Max Q Rear Wing for the Yokomo YZ-2 ad YZ-4 series. 

Product Code: Z2-008F3G This is an optional pair of Graphite Front Suspension Arms (Type B) for the Yokomo YZ-2 CAL3/DTM3/3.1

Product Code: S4-008R5G This is an optional pair of Graphite Rear Suspension Arms L5/LD (Type B/Φ3.5 Pin) for the YZ-4 SF2/CAL3.1/DTM3.1

Product Code: Z2-20425 This is a Yokomo 15.5mm Aluminum Clamping Servo Horn (25T)

Product Code: Z2-503GH2 This is a replacement Gear Differential Case/Cap (High Capacity) for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-2T

Product Code: Z2-415T10 This is a pack of two replacement Graphite Steering Block Plates (1mm offset) for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-2T

Product Code: Z2-303TAD This is an Optional Aluminum Direct Mount Top Shaft for the YZ-2 CAL3/DTM3/3.1/ YZ-2T

Product Code: YT-RW25 This is a pack of two optional Yokomo 25g Battery Weights

Product Code: Z2-300FLS This is a replacement Aluminum Front Lower Suspension Mount for the Yokomo YZ-2 CAL3.1

Product Code: Z2-412F3 This is a Front Anti Roll Bar Set (6 Sizes) (0.7mm to 1.2mm) for the Yokomo YZ-2 CAL3/DTM3/3.1

Product Code: BD-500GO This is a pack of four replacement Silicone Gear Differential O-Rings for the Yokomo YZ-2 CAL3/DTM3/3.1/YZ-4 SF/SF2

Product Code: Z2-118-31 This is a replacement Battery Holder/Radio Tray/Spur Gear Cover for the YZ-2 CAL3.1/DTM3.1

Product Code: Z2-S8T This is a pack of two optional Shock Mounting Nuts for the YZ-2 CAL3/DTM3/3.1

Product Code: Z2-30RUMW This is an optional Aluminum Rear Upper Arm Mount (Wide) for the YZ-2 CAL3/DTM3/3.1

This is a Whitz Racing Hyperglide Ceramic Bearings - Full Kit for the Yokomo YZ-2 CAL3/DTM3/3.1 High-Performance Hybrid Ceramic Bearings Features: ...

Product Code: LMRMINIQ This is an LMR (Lee Martin Racing) Mini Max Q Front Wing for the Yokomo YZ-2 Series. Includes one wide and one mid front wing. 

Product Code: Z2-503IC This is a replacement Idler Gear (LC Gear Box) for the YZ-2 CAL3/DTM3/3.1 *Does not fit LD Gear Box. Idler Gear Z2-503I is r...

Product Code: Z2-415SH3 This is a replacement pair of Steering Blocks (Hard Type) for the YZ-2 CAL3/DTM3/3.1