All

Product Code: YMR005 Push the limits of your setup with the Yok Modz Racing Rear Camber Link Shock Tower, designed specifically for the Yokomo SO s...

Product Code: Y2-503I-A This is an Idler Gear for the Yokomo YD-2

Product Code: RD-008FA19 This is a pack of two optional Aluminum Φ4.5mm Rod End Adapters (19mm) for the Yokomo RD2.0 Made of lightweight aluminum t...

Product Code: S4-S18213 This is a pack of two 13mm Shock Pistons (Φ1.8x2x2.0mm) for the Yokomo SO/MO

Product Code: ZC-N4FBKA This is a pack of four Yokomo M4 Aluminum Serrated Flanged Nuts (Black). 

Product Code: Y2-SBBSRA This is an SLF (Super Low Friction) Aluminum Big Bore Shock Set (Red) for the Yokomo RD/SD/MD The cylinder diameter is wide...

Product Code: Z4-415SA This is a Steering Block Set for the Yokomo MO

Product Code: ZC-S50SA This is a pack of Yokomo 5.0mm Stainless Steel Spacer Shims (0.05/0.10/0.20mm). There are ten shims of each size in the pack.

Product Code: ZS-016MGRR This is an optional Yokomo All Purpose Rear Magnetic Body Mount (Red)

Product Code: Y2-P08FUIA These are optional Aluminum Front Upper Suspension "I" Arms (Blue) for the Yokomo RD/SD/MD series  By moving the spacer, t...

Product Code: Y2-202BB This is an Aluminum Bell Crank Base for the Yokomo RD2.0 The aluminum base increases the mounting rigidity of the bell crank...

Product Code: Z2-002FWS This is a Steel S2 Front Chassis Weight (25g) for the Yokomo SO2.0/SO3.0 It is installed under the servo to adjust weight a...

Product Code: S4-002SPG Graphite Side Plate/Battery Post/Antenna Mount set for the Yokomo MO

Product Code: ZC-A3610BA This is a pack of eight Yokomo 3x6x1.0mm Black Aluminum Shims

Product Code: BD-500GOA This is a pack of four replacement Silicone Gear Differential O-Rings for the Yokomo SO/MO/SD

Product code: YS-8DS2 This is a pack of four Yokomo Shock Diaphragms (Soft) for Big Bore Shocks

Product Code: Y4-S8A This is a pack of four Yokomo Shock Mounting Balls for Big Bore Shocks (Black)

Product Code: Y2-011CR5A This is a pack of two Clamping Wheel Hubs (Red) (5.0mm) for the Yokomo YD-2/RD/SD Series. 

Product Code: Y2-P08FSCA These are Aluminum Front Lower Short A-Arms (Purple) for the Yokomo YD-2/RD/SD By further shortening the arm length compar...

Product Code: Z2-008R3GA This is an Optional pair of Graphite S3/LD Rear Suspension Arms (Type B) for the Yokomo SO

Product Code: Z2-415SH3A This is a pair of Steering Blocks (Hard Type) for the Yokomo SO1.0/RO

Product Code: YM-PS327 Yokomo's very popular brush motor is now available in a new model. The Pro Stock 3 motor is a single-wind 27-turn motor with...

Product Code: ZS-016MGRBL This is an optional Yokomo All Purpose Rear Magnetic Body Mount (Blue)

Product Code: Y2-302S2A This is a High Traction Gearbox Spacer (2.0mm) for the Yokomo RD/SD Series This spacer raises the gearbox 2.0mm, increasing...