All

Product Code: SP-02DV2R This is a Yokomo SP-02D V2 Programable Digital Low Profile RWD Drift Servo (Red). The latest drifting steering servo, whic...

Product Code: BL-RPX3 The "RPX3" is the new flagship model that surpasses the performance of the previous RPX speed controller, which had establish...

Product Code: Y2-204523A This is a Yokomo 23mm Aluminum Clamping Servo Horn (25T) The length and offset from the servo axis are optimized for YD-2 ...

Product Code: DRB-118LA This is an optional Short Size Li-Po Battery Holder for the Yokomo YD-4

Product Code: S4-SB1320 This is a pack of two 13mm Blank Shock Pistons (2.0mm Thick) for the Yokomo SO2.0/MO2.0

Product Code: RD-302FB This is an optional Aluminum Front Bulkhead Bridge for the Yokomo RD2.0/SD2.0 It increases the rigidity of the front area an...

Product Code: RPM-DX105RR Tested not only in Japan but also on a wide variety of road surfaces and situations on drift circuits around the world, T...

Product Code: YB-LSBB This is a Yokomo LiPo Safety Bag. Can be used for charging, discharging and storage of LiPo batteries. Fits up to 6 shorty si...

Product Code: B2-009ARA This is a replacement Outer Hinge Pin Set for the Yokomo YZ-4 SF2/MO

Product Code: MO-303BC This is a Center Diff Bearing Collar for the Yokomo MO2.0 Use with MO-302CM/BB-1812-2

Product Code: MO-101 This is a replacement Off Road Body (Standard) for the Yokomo MO2.0

Product Code: MO-010B67 This is an optional Center Bone 67mm (for F/Center Diff) for the Yokomo MO2.0

Product Code: S4-S4S13 This is a replacement 13mm Front “X30” Shock Body for the Yokomo SO2.0

Product Code: S4-S1L13 This is an optional 13mm Rear “X30” Shock Set for the Yokomo SO2.0/MO2.0

Product Code: YS-2-5 This is a Yokomo Drift Spring Set (Standard)

Product Code: ZC-N4FBKA This is a pack of four Yokomo M4 Aluminum Serrated Flanged Nuts (Black). 

Product Code: Y2-REM-RA This is an optional Rear ESC Mount Set (Red) for the Yokomo YD-2 Series. 

Product Code: Y2-301SA This is a pack of two Suspension Mount Spacers (1.0mm) for the Yokomo YD-2

Product Code: D-155-20AA This is a pack of two optional Aluminum 20mm Rod End Adapters (Narrow Steering) for the Yokomo Drift Pack

Product Code: Y4-207A This is a replacement Ball End Cap Set for the Yokomo YD-4

Product Code: Y4-016A This is a replacement Front/Rear Body Mount Set (Plastic) for the Yokomo YD-2/YD-4

Product Code: B4-821A This is a pack of two 12mm Hex 1/10 Front Buggy Wheels (Yellow) for the Yokomo YZ-4/MO 

Product Code: Y2-P08FSCA These are optional Aluminum Front Lower Short A-Arms (Purple) for the Yokomo YD-2 By further shortening the arm length com...