Yokomo YZ-2/YZ-4/SO/MO Series

Product Code: YS-12105RF This is a pack of two Yokomo Off Road Φ13mm Flexible Rear Shock Springs (Red) (10.5t) The Flexible Series is a lineup of o...

Product Code: RP-041-06A This is a pack of four Racing Performer M3x6mm Precision Machined Titanium Button Head Socket Screws

Product Code: S4-303DCBA This is a replacement Slipper Drive Cup for the Yokomo YZ-4 SF2/MO

Product Code: ZC-SS310A This is a pack of ten Yokomo M3x10mm Set Screws

Product Code: ZC-BH26A This is a pack of ten Yokomo M2x6mm Button Head Socket Screws

Product Code: ZC-206LLHA This is a pack of six 16.8mm Socket Head Ball Studs (Thread 10.0mm) (Size LL)

Product Code: Z2-S4CA This is a replacement pack of "X33" Shock Collars for the Yokomo YZ-2 CAL3/DTM3

Product Code: Z2-S3A This is a Shock O-Ring Cap for Yokomo SO/MO

Product Code: YS-7AB This is a pack of eight replacement Shock O-Rings of Adjust Nut for Yokomo YZ-4/SF

Product Code: S4-S2LA This is a pack to two Rear Long “X30” Shock Shafts for the Yokomo MO1.0/MO2.0/SO2.0/SO3.0

Product Code: Z2-415T05A This is a pack of two Graphite Steering Block Plates (0.5mm Offset) for the Yokomo SO1.0

Product Code: Z2-S172A This is a pack of two Yokomo 2.0mm Shock Pistons (1.7mm x 2 Hole)

Product Code: MO-303AJS This is a replacement COL Adjust Screw Set for the Yokomo MO2.0

Product Code: S4-504GHA This is a replacement Center Gear Diff Housing for the Yokomo MO

Product Code: S4-412WSA This is a "Soft" Anti Roll Bar Wire Set (1.0-1.5mm) for the Yokomo MO

Product Code: S4-412HA This is a replacement Anti Roll Bar Stabilizer Holder Set for the Yokomo MO

Product Code: S4-412BA These are replacement Sway Bar Balls (Hard Anodized) for the Yokomo MO

Product Code: S4-01077BA This is a replacement Front 77mm Bone for the Yokomo MO

Product Code: ZC-204320A This is a Yokomo 20mm Aluminum Clamping Servo Horn (23T)

Product Code: Z2-002FWA This is a replacement Aluminum S2 Front Chassis Weight (9g) for the Yokomo SO2.0 It is installed under the servo to adjust ...

Product Code: BM-S162A This is a pack of two Yokomo "X" Black Shock Pistons (1.6mm x 2 Hole)

Product Code: BM-010BCA This is a replacement Front/Rear Bearing Collar Set for the Yokomo MO

Product Code: B2-670PA This is a replacement Slipper Plate Set for the Yokomo SO/RO

Product Code: Z2-S1SS This is an Aluminum Shock Set (F/R) for the Yokomo RO