Yokomo

Product Code: Z2-101ROL This is an optional RO1.0 Off-Road (Light Weight) Body Shell for the Yokomo RO/SO Series Especially effective on high-grip ...

Product Code: ZS-GWBLS This is a pack of two Gokuraku Off-Road Wings (Straight) (Light Weight) for the Yokomo YZ-2/SO/MO This is a lightweight type...

Product Code: D-056MA This is a Yokomo Aluminum Wing Stay (Mid) (Silver)

Product Code: Y2-501MRA These are replacement Aluminum Ball Differential Outdrives for the Yokomo YD-2 Series *Use with Y2-500AA Yokomo Aluminum Ba...

Product Code: RP-6113B6A This is a pack of two Racing Performer 5 Spoke Drift Wheels (12mm Hex) (Black) (6mm Offset)

Product Code: Y2-008RW5 This is set of two optional Yokomo Brass Rear "H" Arm Weights (5g each)  Use with Yokomo Aluminum Rear "H" Arm (Weight Spec...

Product Code: ZC-F312A This is a pack of ten Yokomo M3x12mm Flat Head Screws

Product Code: S4-303DCBA This is a replacement Slipper Drive Cup for the Yokomo YZ-4 SF2/MO

Product Code: MO-303AJS This is a replacement COL Adjust Screw Set for the Yokomo MO2.0

Product Code: Z2-002FWA This is a replacement Aluminum S2 Front Chassis Weight (9g) for the Yokomo SO2.0 It is installed under the servo to adjust ...

Product Code: B4-821A This is a pack of two Yokomo 12mm Hex 1/10 Front Buggy Wheels (Yellow) 

Product Code: S4-412BA These are replacement Sway Bar Balls (Hard Anodized) for the Yokomo MO

Product Code: Z2-S4CA This is a replacement pack of "X33" Shock Collars for the Yokomo YZ-2 CAL3/DTM3

Product Code: S4-504GHA This is a replacement Center Gear Diff Housing for the Yokomo MO

Product Code: Z2-S172A This is a pack of two Yokomo 2.0mm Shock Pistons (1.7mm x 2 Hole)

Product Code: BM-S162A This is a pack of two Yokomo "X" Black Shock Pistons (1.6mm x 2 Hole)

Product Code: ZC-204320A This is a Yokomo 20mm Aluminum Clamping Servo Horn (23T)

Product Code: BM-010BCA This is a replacement Front/Rear Bearing Collar Set for the Yokomo MO

Product Code: ZC-SS310A This is a pack of ten Yokomo M3x10mm Set Screws

Product Code: S4-412WSA This is a "Soft" Anti Roll Bar Wire Set (1.0-1.5mm) for the Yokomo MO

Product Code: S4-412HA This is a replacement Anti Roll Bar Stabilizer Holder Set for the Yokomo MO

Product Code: BB-730-4A This is a pack to four replacement Yokomo 3.0x7.0x3.0mm Ball Bearings

Product Code: B2-670PA This is a replacement Slipper Plate Set for the Yokomo SO/RO